Printable View
Upper door latches, seems like everyone has trouble with how to do these, I sure have, went through about 5 different ways to do the upper latches, back to the drawing board multiple times but settled in on a spring loaded latch pin kind of thing. Here's some pics,
Attachment 1305Attachment 1306Attachment 1307
and the front striker plate,
Attachment 1308Attachment 1309Attachment 1310
here's how I did the spring pin mount,
Attachment 1311Attachment 1312
and to be able to open from the outside I did have to make a little handle to twist the cable and actuate the pins, not the prettiest but oh well, the inside gets covered with a little handle,
Attachment 1313Attachment 1314
inside handle, fits over the round cam,
Attachment 1315
Pop-Up Headlights - catching up with posting, more body-mechanical stuff, I like the novelty of pop up head lights, the previous builder glassed them in and added cutouts for fixed lights but I converted it back to pop-ups. Mounted the hinges before cutting out the headlight doors, I don't think I would've got the alignment anywhere close if I didn't.
Using Mazda Miata headlight motors with Hella Vision-Plus 5x7 DOT lights, they seem nice. Getting a electric pop up mechanism packed inside that front fender area was a real pain, looks like I'm entering a "Rube Goldberg" competition but it works!
Attachment 1316Attachment 1317Attachment 1318Attachment 1319Attachment 1320Attachment 1321Attachment 1322Attachment 1323Attachment 1324Attachment 1325
oops, got a couple pics formatted sideways,
Here's the pop-up headlight in action, changed all the joints to double sheer to keep better alignment and avoid binding,
https://youtu.be/28RGDQnshUk
final assembly will get the fine adjustments right and get rid of the bounce when the headlight doors land at the top and bottom
Really great solutions and progress. I want to do my upper door latches your way and then to go to the next level on that make some covers. Did you have ideas for that allready? It might be easy to 3d print something ...
Great creativity Dave.
Hey Jerry thanks, yea,would be nice to cover the little latch brackets that hold the spring loadedpins on the upper doors. I hadn't got that far yet, played a little bitwith cutting pvc in half and molding that in but looked too bulky, I may try athin gage sheet metal cover, 3d printed plastic would work, could maybe get amore professional looking cover that way. I wish I had a cleaner lookingway to latch the upper door but I tried everything I know of, even trying toembed neodymium magnets in the bodywork but felt like I needed a more positivelatching mechanism. A lot of the door latches I've seen on old 70's racecars look pretty crude, purposeful only, I was trying to come up with somethingthat looked decent with the door open.
I took that latch idea from here, a pic I think Igot off of ebay,
Attachment 1331
more headlight mech pics, took some work to come up with something that stayed out of the wheelwell,
Attachment 1332Attachment 1333Attachment 1334Attachment 1335