Manta Mirage Door Latches

[Blueovalz]

I put the latch (I used the Bear Claw trunk latch for my doors) in the door itself, and the pin in the jam. The latch itself does not really promote any adjustability, mainly because to make it as clean an installation as possible, I needed to countersink the 1/4" holes and use flat-top screws to hold the latch. The pin can be made adjustable by drilling a larger hole than needed and using that to move the pin to an ideal location, but that is about it as far as adjustability, at least from my perspective. A concern I had when I first acquired the trunk latches was that they would be single-sided (because there is no left or right side trunk), but the ones I got were indeed left and right handed.