Results 1 to 6 of 6

Thread: Aluminum dash with SpeedHut gauges.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Champion Member Blueovalz's Avatar
    Join Date
    Jul 2014
    Location
    Little Rock, AR
    Posts
    279

    Aluminum dash with SpeedHut gauges.

    The dash is a completely separate structure from the chassis or the bodywork. It is made from a combination of 1", 3/4", and 1/2" square tubing that has an aluminum sheet riveted to the front to make it twist resistant, and then this structure is firmly bolted onto the chassis framing. The gauges are programmable, as well as having limit warning LEDs built into the face. The green lights are turn signal indicators, the red is a "12 vdc hot" indicator, meaning the master switch has been turned on, and the white is the headlight indicator. These will probably be changed to a different configuration in the future, but this is how it stands today. All switches for the various electrical stuff is on the left side under the lower door (not visible in the photo). Also not visible, is a rear-view camera display under the door (to keep it in the shadow of the door), for backing up, and to be used as a rear-view mirror until I can decide what mirror arrangement I want.

    Last edited by Blueovalz; 10-18-2014 at 06:44 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •