Results 1 to 2 of 2

Thread: External Power Connector

  1. #1
    Champion Member Manta22's Avatar
    Join Date
    Jul 2014
    Tucson, AZ

    External Power Connector

    The front suspension is now finished and aligned, except for toe-in which I'll set to zero later. I re-made my anti-roll bar down links to get a little more clearance around the bottom of the upright and around the coil-over adjusting nut.

    Today I mounted a big electrical connector that will allow me to charge the battery or to start the engine using an external 12V battery. It is made by Elcon and rated for beaucoup amps. It is mounted with 4 ea 10-32 Ti screws into steel Riv-nuts.

    I measured the dimensions of a panel in the cockpit that I'll need to cut out. More rivet fun coming up!

    Regards, Neil Tucson, AZ
    Attached Thumbnails Attached Thumbnails Charger-Power Port 1.jpg   Charger-Power Port 2.jpg   Charger-Power Port 3.jpg  
    Regards, Neil Tucson, AZ

  2. #2
    Administrator Sulley's Avatar
    Join Date
    Sep 2012
    That is a great idea! I'm always having to deal with trickle chargers and those starting issues around weak batteries.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts