NASCAR sway bar install on the rear of the Mirage

[Blueovalz]

Finished up the rear X-bracing that I had to modify (re-make) after the fabrication of the sway-bar housing.



In the meantime, another issue is popped up in that the sway bars I have are not timed properly. In other words the splines are not aligned end to end, so I've got about a 3/4" to 1" difference in link length between the two sides. Odd stuff for what was advertised as "new" bars. Anyway, they are serving their purpose (mock up and testing), and I will be going to hollow bars as soon as I determine what size I want to settle on.