Results 1 to 2 of 2

Thread: Manta Mirage front air intake

  1. #1
    Administrator Sulley's Avatar
    Join Date
    Sep 2012
    Location
    Atlanta
    Posts
    294

    Manta Mirage front air intake

    I notice as in the attached picture some Mirage's have what looks like an aluminum under tray to separate and/or direct air toward the radiator. My question for those more knowledgeable than me is wouldn't this small opening limit the air into the radiator vs leaving it open? It seems if it was open more cfm of air would be available as is the case in most production cars.
    Attached Thumbnails Attached Thumbnails Manta front air intake.jpg  

  2. #2
    Champion Member Blueovalz's Avatar
    Join Date
    Jul 2014
    Location
    Little Rock, AR
    Posts
    279
    What you're saying may be true if the radiator passed air through the hood at the same rate as if it wasn't there at all. But the radiator does present a small pressure drop across it, thus bringing a closer unity between the opening area, and the radiator area. Secondly, air is going to follow a path of least resistance. If there was no lower wall or fence, air would see the radiator more of an impedance than the open area underneath it, and thus the much of the air that would normally be forced through the radiator would instead simply flow under the car. In my particular example, once get up to about 25 MPH, I no longer need the fans. Even with some very tight fan shrouds, and the fans off, enough air still passes through the radiator to cool the engine above this speed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •