Results 1 to 2 of 2

Thread: Gas Pedal and Throttle Cable

  1. #1
    Champion Member
    Join Date
    Aug 2014
    Posts
    219

    Gas Pedal and Throttle Cable

    Control Cables of Santa Fe Springs, California

    I used them too for a decompression cable for my cafe racer. Custom weird ends. Made it perfectly.
    Jeff


    ---------------------------------------------------------


    I made up a pedal assembly from a pile of surplus aircraft brackets together with pedals that I fabricated.

    The cable I bought from Cable Controls- specify “low friction”.

    Regards, Neil



    ---------------------------------------------------------




    "Morse cable is what I use Baum Hydraulics in Omaha will make them to length and ship anywhere i haven't found them any cheaper " Rod



    ---------------------------------------------------------

    "Control Cables of Santa Fe Springs, California provided a custom made cable for my project. 113 inches in length it works great attached to and after market dune buggy vehicle pedal assy. to Holly 4 bbl carb." Ken

    ---------------------------------------------------------

    "I'm running a custom pedal assembly.

    For the cable, I'm using a braided steel, teflon-linked hose. Although it's "designed" to be used as brake line hose, it works great for a throttle cable, thanks to the low-friction teflon. " Ken

    -----------------------------------------------------------


    "I'm using a Tilton brake pedal assembly, which uses a cable (Lokar) throttle cable run under the set separator (central hump of the seat tray) back to the engine. It does of course require fabrication of some bracketry on both ends of the cable."

    Terry
    --------------------------------------------------------
    Last edited by Jerry; 10-24-2020 at 11:05 AM.

  2. #2
    Champion Member
    Join Date
    Aug 2014
    Posts
    219
    Click image for larger version. 

Name:	Mirage Pedals a.jpg 
Views:	8 
Size:	62.3 KB 
ID:	1108
    Click image for larger version. 

Name:	a.jpg 
Views:	8 
Size:	15.7 KB 
ID:	1109
    Last edited by Jerry; 10-24-2020 at 11:06 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •