Newcomer's Handbook to Constructing CoilsConstructing your own heating elements can look difficult, but our manual makes it easy for novices to get started. Start with essential equipment like a coil tool, wire cutters, and pliers. Select a filament substance, such as Kanthal wire, and wrap it around the coil jig to form your heating element. Once you have the desired amount of coils, shorten the excess wire and place the coil into the terminals of your atomizer. Fasten the fasteners to attach the coil and position its alignment with grippers. Next, check the filament’s resistance with an ohm meter to ensure it’s within secure limits. Once everything looks proper, place a strip of wick material through the heating element and cut the extremities. Soak the cotton with e-liquid and put back together the atomizer. Connect it to your device and slowly adjust the wattage to condition the coil. With repetition, creating your own filaments can become a satisfying and cost-effective way to enhance your vaping experience. Eleaf Melo RT 22 Vaporizer 4.5ml Container Benefits and Drawbacks of Using Prefabricated Wires 01c328d